PG Tool Sales Agency LLC
Representing Products for the Professional Trades
  • Home
  • Services
    • Product Demos
    • Product & Safety Training
    • Marketing
  • Manufacturers
    • Line Card
    • Airmaster Fan
    • BluBird Industries
    • BoltStar
    • CMT Orange Tools
    • Dentec Safety >
      • Healthcare & COVID
    • Gatorbar by Neuvokas
    • Hougen >
      • Hougen Product Videos
    • Louisville Ladder >
      • Safety
    • Metabo >
      • Metabo Bevel Tools
      • Metabo Product Videos
      • Metabo Safety Solutions
    • Probst
    • Toter
  • About Us
    • Territory Covered
    • Memorabilia
  • Contact
Picture
Even if you don't have a coolant bottle or you have a standard HMD904, here is the best way to still provide lubrication to the cutter with your magnetic drill.

A powerful, lightweight low cost mag drill for the non-production fabricator. Built with the same quality and craftsmanship you have come to expect from Hougen. 1-1/2" x 2" hole capacity and made in the USA.

The HMD900 is a basic, no frills, magnetic drill for those who don't drill holes all that often. Find out everything from the specs to features to drilling a hole.


RotaCut Sheet Metal Hole Cutters make fast burr-free holes in materials up to 1/2” thick. They cut holes 3x faster and last 10x longer than twist drills or hole saws. Use in hand-held drills or drill presses. Made in the USA.

The Hougen HMD918 mag drill makes a 2" diameter by 6" deep hole through a solid chuck of steel in a single pass using a carbide tipped annular cutter. The HMD918 is made in the USA.

Heavy Duty Hole Punch with Power Retract
​
Our heaviest duty model, the 75006PR develops 26.9 tons of pressure and will produce up to 15/16″ round holes and can punch through material up to 1/2″ thick material in approximately 4 seconds. Like all Hougen-Ogura Punches, its single body design makes it easy to use anywhere. Easily confirm the hole position with the jog down feature. Punch automatically returns to the starting position after the punching cycle is complete. If punch ever resists returning to the home position, squeeze the trigger for power feed return. Work stand, foot switch, 13/16″ punch & die and tool kit are standard.

Punch holes through steel in as little as 2 seconds with the Hougen-Ogura Hole Punchers. Self contained units with only a 120V power cord. Quicker than drilling.

The HMD2MT mag drill from Hougen features a #2 Morse Taper arbor system so you can use a variety of tooling and do more with just one drill. Made in the USA.

By using the HMD2MT mag drill from Hougen, you can easily tap both through and blind holes. Each one requires a slightly different technique.

Hougen RotaCut sheet metal hole cutters helped me make holes in this angle angle iron using a hand-held drill.

RotaCut Sheet Metal Hole Cutters make hole holes 3x faster and last 10x longer than twist drills or hole saws. Made in USA.

Swivel base mag drill helps you precisely line up the pilot, especially useful horizontal or overhead applications. The HMD904S will drill holes up to 1-1/2" in diameter and 2" deep. Made in USA.

The Hougen HMD904 magnetic drill was used to remove rivets for a railroad bridge rehab project. First it drilled through the rivet head and then through the triple stacked plate. The rivet was then removed and replaced with a bolt.

Services

Product Training
On-Site Demos
Marketing

Company

About
Product Lines
Territory

Support

Contact
Privacy Policy
Terms of Use
2023 Full Line Card
Manufacturers' Agents National Association
STAFDA Rep/Agent
PG Tool Sales Agency, LLC
537 Mantua Pike, Suite 201
Woodbury, NJ 08096
800-257-8419    fax 856-848-0654
sales@pgtool.com
© COPYRIGHT 2021 ALL RIGHTS RESERVED